CNH DPA5 EST V9.8 Diagnostic Interface | New Holland, CASE, Iveco, and Kobelco

What is the CNH DPA5 EST V9.8 — and what is it for

The CNH DPA5 is the official diagnostic interface for the CNH Industrial group, simultaneously covering equipment from the brands New Holland, CASE, STEYR, Kobelco, Fiat-Kobelco, Flexi-Coil, Sumitomo and Iveco (articulated trucks). With the CNH EST V9.8 software, technicians can access all electronic modules of the equipment for diagnosis, ECU reprogramming, and real-time monitoring.

The DPA5's technical differential is the E.A.S.y (Electronic Assistance System) system with K-Line protocol for direct engine diagnosis and ECU recharging, a capability that most third-party interfaces do not offer for CNH platforms. Connection via USB. 12-month warranty.

ECM Tech Center sells and provides technical support for the CNH DPA5. Contact us before purchasing to confirm compatibility with your equipment's model and year.

What you can do with the CNH DPA5 + EST V9.8

Function	Description
Complete diagnosis	Access to all equipment modules: engine, transmission, hydraulic, electrical
DTC reading and deletion	Identifies, interprets, and clears fault codes from all systems
ECU reprogramming	Updates and reconfigures replacement control modules
Firmware download	Installs software updates on electronic modules
Real-time monitoring	Live operational data: temperature, pressure, RPM, voltages
Interactive component tests	Activates actuators individually for operation verification
E.A.S.y via K-Line	Direct engine diagnosis and ECU recharging via K-Line protocol
Calibrations	Calibration of parameters according to CNH specifications

E.A.S.y — The DPA5's Differential

The E.A.S.y system uses the K-Line protocol to communicate directly with the engine and ECU, allowing engine diagnosis without going through the CAN bus (direct communication), ECU recharging and reprogramming even in modules with CAN communication failure, and access to low-level functions that multi-brand tools cannot reach on CNH platforms.

Compatibility — New Holland (Agriculture and Construction)

Type	Examples
Agricultural tractors	T, TM, T7, T8, T9 series and other NH models
Combine harvesters	CR, CX, TC — combine harvesters
Loaders	Skid steer and compact NH loaders
Backhoe loaders	B110B, B115B and others
Excavators	E Series NH

Compatibility — CASE (Construction and Agriculture)

Type	Examples
Backhoe loaders	580N, 590ST, 695ST and others
Excavators	CX and CX B Series
Loaders	570, 580, 590 — wheeled
Agricultural tractors	Puma, Magnum, Steiger Series
Combine harvesters	2000 and 5000 Series

Other compatible groups

Brand	Equipment type
STEYR	Agricultural tractors
Kobelco	Excavators
Fiat-Kobelco	Construction equipment
Flexi-Coil	Planting and application equipment
Sumitomo	Excavators
Iveco	Articulated trucks (off-road)